Extrusion Mill

HHV Extrusion Mill

Aerospace extrusion

The Modig HHV Extrusion Mill has been designed as a universal machining center for aerospace extrusion components. It has the capability of bar stock machining both Aluminium and Composite components in one single operation or setting.

The HHV Extrusion Mill was developed in close cooperation with the world’s largest aircraft manufacturer and from its introduction in 2010, it quickly rose to become the first choice of leading aircraft producers.

Tests have also been made on bar stock materials by our profiling machine revealed reduced machining time per part of approximately 30% compared with standard three and four axis machining. At one of the world’s leading airplane builders, we measured a reduced processing time of 50%.

Modig has been building profiling machines since 1988. Over the years, more than 30,000 drawings of machines and components have been analyzed and evaluated. This means that Modig has acquired a depth of knowledge and experience that is unique in the world. This is the knowledge that has been our source of guidance for the development of the HHV.

  • Drawing Extrusion
Quick Specs
MILLING SPINDLE  
Max RPM 30,000
Spindle Taper: HSK-A63 DIN-69893
TRAVEL  
X/Y/Z 1500 mm (59.06") / 420 mm (16.54") / 260 mm (10.24")
U1/U2 Axis  900 mm (35.43")
ROTARY CHUCK(S)  
Feed rates:  0 - 60 rpm
Bore diameter:  250 mm / 10"
Max. Extrusion Size (workpiece)  150 mm x 250 mm (6" x 10")
TOOL CHANGER  
Number of tools standard:  24
Tool changing time  5 sec. (chip to chip)
FEED RATES  
X/Y/Z/U  0 - 2,400 inch/min (0 - 60 m/min)
A1/A2/A3:  60 rpm/min
SIZE  
Floor space  40' (12,0 m) x 15' (4,0 m)
Weight, short bed, w/ (2) chucks:  7,000 kg (15,430 lbs.)